Thermic Fluid Heater

Oil Fired – Gas Fired – Diesel Fired – Electric – Wood Fired – FO Fired

PROFILE

Precitech manufactures supplies a Coil Type Vertical Thermal Fluid Heater. It is also available in Horizontal Type.
Range- 50,000 kcal/Hr. to 5,000,000 kcal/Hr.
Temperature Range 300°C for standerd unit and 350 & 400°C for high temprature.

DESIGN FEATURES

• Fully Automatic Operation.
• Due to larger Heating Surface & efficient Burner we get High Thermal Efficiency of 87%±2.
• The Pressure Jet Burner of Precitech is adjusted to a high CO2 content maintaining clean combustion, almost free of air pollutants.
• Due to Coil Type design & Maximum safeties incorporated, there are no explosion hazards.

Thermic Fluid Heaters

Thermic Fluid Heater

A Thermic Fluid Heater is an industrial heating equipment used exclusively where heat transfer is more pertinent than pressure. The fluid circulates in the entire system for heat transfer for specific operations & is used in heating processes that use high viscous oil as a heating medium. It is widely used in the Textile, Printing, Dyeing, Plastic and Rubber Industries.
> Capacity : 5000 to 9000 Million Kcal / Hr
> Temperature : 35oC to 400oC
> Fuel : Diesel, LDO, FO

Diesel Fired Thermic Fluid Heater

Similar to a thermic fluid heater, the Diesel Fired Thermic Fluid Heater is also used for heat transfer. But in this case, the fluid is heated externally. This is because of its characteristics which include high heating temperature, low working pressure, and best at energy saving. It’s widely used in a variety of industrial heating processes such as the Petroleum Industry, the Chemical Industry, and the Synthetic Fibre Industry.
> Capacity : 5000 to 9000 Million Kcal / Hr.
> Temperature : 35oC to 400oC
> Fuel : Diesel, LDO and FO
Thermic Fluid Heaters
Thermic Fluid Heaters

Electric Thermic Fluid Heater

The Electric Thermic Fluid Heaters are different from Oil & Gas-fired Heaters. The fluid heaters are specifically designed to be electrically fail-proof that can withstand high temperatures taking care of numerous electric standards. These heaters are considerably more cost-efficient and are popularly used in the Chemical Industries, and Plywood and the Laminates Manufacturing Industries.
> Capacity : 5000 to 9000 Million Kcal / Hr
> Temperature : 35oC to 400oC
> Fuel : Electirc

Wood Fired Thermic Fluid Heater

Wood Fired Thermal Fluid heater is an innovative type of heating equipment with solid fuel and fuel gas as the heat source. The heat carrier fluid forces the heat transfer to the user equipment via a circulating pump and then returns to the heating furnace for reheating. Its characteristics are high heating temperature, low working pressure, and energy-saving mode. This makes it best for the Petroleum and the Chemical Industries. 
> Capacity : 5000 to 9000 Million Kcal / Hr.
> Temperature : 35oC to 400oC
> Fuel : Wood, Husk, Pallets.
Thermic Fluid Heaters
Thermic Fluid Heaters

FO Fired Thermic Fluid Heater

Furnace Oil Fired Thermic Fluid Heaters are perfect heating solutions used where only heat transfer is desired instead of pressure. In the Thermic Fluid Heaters, fluid is circulated in the entire system for heat transfer in the desired processes. These fluid heaters use high viscous oil as a heating medium. Various Food Processing, Rubber, Plastic, Publishing, Print, Textile, and Chemical Industries require Furnace Oil Fired Thermic Fluid Heaters for smooth functioning.
> Capacity : 5000 to 9000 Million Kcal / Hr
> Temperature : 35oC to 400oC
> Fuel : Diesel, LDO, FO